Add Scanning Capabilites to Your Huntron Tracker Model 30
System
Adding a Huntron® Scanner to your Tracker Model 30 system lets you
access components using standard DIP clips and cables, custom cables to PCB
connectors or interface to a bed-of-nails.You can compare one component with
another in real-time (64 pins max.) or use your PC to automate testing and scan
up to 128 pins.Huntron Scanners can be used with a Huntron Access Prober to
provide Common line connections while the Prober is probing a PCB. This method
gives you up to 128 selectable Commons to use. For example, you can connect the
Scanner to a connector on a PCB mounted in the Prober using a common ribbon
style cable. While the Prober is probing, any one of the lines on the connected
ribbon cable can be selected as the Common reference. This would provide you
true point-to-point testing capabilities.Note: The ProTrack Scanner will be
replaced by the Scanner II and/or the Scanner 31S effective 1/1/2008. This
applies to commercial sales only.Scanner II and Scaner 31S users may want to
consider these Optional Accessories to enhance their test
capabilities.
Highlights:
· The Scanner II and Scanner 31S accessories add
scanning capability to the Tracker Model 30
· All Scanners have a minimum 64
pin capability
· The Scanner II can scan up to 128 pins when the A and B
channels are combined
· The Scanner 31S use standard IDC style
connectors
· The Scanner II uses the common SCSI-2 (68 pin) style
connectors
· Up to 8 Scanner IIs can be “daisy-chained” to increase the
available number of test pins
Selecting Accessories for your Scanner IIThe
Scanner II accessories for interfacing to your printed circuit board come "ala
carte". This means that you select the accessories you want included with your
Scanner. Choose from SMT or through-hole style DIP clip and cable kits (Scanner
Adapter required with Scanner II) or a mutli-pin breakout cable. Details on
these accessories are provided on this page
Hiç yorum yok:
Yorum Gönder